efficiency)
└ 액상효능도(Liquid phase efficiency)
1) Column Efficiency (컬럼효능도)
• 원래 조밀했던 띠가 Column을 통과하면서 Peak 사이의
폭이 넓어지는 정도.(화합물의 개수 확인 가능)
• peak는 가능한 한 sharp하게 나오는 것이 좋다.
• 이것은 한 개의 이론적 Column 층에 해당되는
1. 서론
1.1 Why we choose this theme?
- 바이오 디젤의 유용성
- 기존 방식을 효소를 이용한 방식으로 바꿈으로써 기존 방식보다 더 나은 생성 가능성
2. 이론
2.1 What is Biodiesel?
바이오에탄올과 함께 가장 널리 사용되는 바이오연료이다. 콩기름, 유채기름, 폐식물기름, 해조유 따위의 식물성 기름을
efficiency of inventory control and sales management, higher ratios of product rotation and less cost of sales management and operating cost
→ Higher competitiveness
C. Promotion strategy: Continuous leaflet advertisement, raising recognition, advertisement in the same sized format.
Original color of E-Mart, Yellow + Red =>unification effect
Execution of events: Chine
2-1. Globalization of Steel Industry.
: Factors promoting globalization is first of all capital-intensive production methods and economies of scale is the fact that more and more relevant. Appearing in almost every industry worldwide, is one of the most noticeable change in the production of labor-intensive production methods from the increasingly capital-intensive production methods is that t
capture more of the market.
조작 : 시장을 장악하기 위해 가격을 낮춤으로써 카르텔(기업연합)의 협정을 어기는 것
55. Circular flow of income : The idea that the expenditures of one group are income for other groups. The income is then spent to create income for still other groups.
수입의 순환 : 한 그룹의 지출은 다른 그룹의 수입이 된다는
1. With which of the international competitors listed in the case is it most interesting to compare Inditex’s financial results? Why? What do comparisons indicate about Inditex’s relative operating economics? Its relative capital efficiency?
GAP H&M Benetton Inditex
ROIC -0.15% 24.16% 11.20% 27.24%
Return on sales -0.06% 9.60% 7.05% 10.46%
COGS/sales 7
1. 데이터 분석
1) 수치해석
이번 실험에서 Fin은 2차원 형상인 Thin Rectangular Fin이다. 하지만 두께가 넓이에 비하여 매우 얇고 기부의 열원이 평행하게 작용한다고 가정하면 온도의 분포는 1차원으로 생각할 수 있다. 이 때 2차원 Fin을 1차원을 가정할 수 있는 근거를 FDM을 이용하여 2차원 수치해석으로
efficient: h = 4.0104 W/㎡K
Fin의 길이와 폭은 실험 시간에 자를 가지고 직접 측정을 하였다. 그 결과 실험 매뉴얼에 제시된 바와 같이 100 X 300 X 2 mm의 제원을 가지고 있는 것을 확인할 수 있었다.
Fig. 0. Fin의 길이 및 폭의 측정 장면
Fin의 두께는 Grid size인 Finite Differential Method(FDM) 분석에서의 dx,
1. 데이터 분석
1) 수치해석
이번 실험에서 Fin은 2차원 형상인 Thin Rectangular Fin이다. 하지만 두께가 넓이에 비하여 매우 얇고 기부의 열원이 평행하게 작용한다고 가정하면 온도의 분포는 1차원으로 생각할 수 있다. 이 때 2차원 Fin을 1차원을 가정할 수 있는 근거를 FDM을 이용하여 2차원 수치해석으로
(4) FDM으로 얻은 data의 Temperature profile
clear all
close all
T_fin = 28.8;
T_b = 34.8;
T_inf = 19;
k = 401;
h = 3.4752;
dx = 0.002;
d = 0.002;
A = eye(3750);
B = zeros(3750,1);
C = zeros(3750,1);
T = zeros(150,50);
for i=1:1:25
B(i,1) = T_fin;
end
for i=3726:1:3750
B(i,1) = T_b;
end
for i=26:1:3725
A(i,i-25) = d;
A(i,i-1) = d;
A(i,i) = -4*d